P230222068
Amada drawing number

Amada put 3 different part numbers against this one drawing. That is normal in these books — the same component is re-coded between machine generations and between markets, and the drawing number is what stays the same. If you have a print with P230222068 on it, these are the numbers it can be ordered under.

These are separate part numbers carrying the same drawing. They are not interchangeable by assumption — check the number against your serial plate and confirm with your Amada dealer before ordering.

Where these numbers belong

74381905 — Plastic Hose

• AC-255NT — Pneumatic(1)
• ACIES 2515T — Slide, Clamp Positioner(without Fixed Clamp)
• AE-2510NT — Pneumatic(3)
• EM 3612 ZRTe — Slide
• EM-3510ZRB — Slide, Clamp Positioner
• EMK-3612 M2 — Slide
• EMLK-3610NT — Brush Table(7), Piping(1)

74415719 — Plastic Hose

• AC-255NT — Tool Balancer(2), Floating Brush Table(7)
• ACIES 2515T — Air-Gas Pressure, Tool Balancer, Clamp Positioner(without Fixed Clamp), Clamp Positioner(with 2 Fixed Clamps)
• EM 3612 ZRTe — Pneumatic, Tool Balancer
• EM-3510ZRB — Pneumatic, Tool Balancer, Clamp Positioner
• EMK-3612 M2 — Tool Balancer
• EMLK-3610NT — Balancer, Clamp Positioner(2)

74901382 — Plastic Hose

• ACIES 2515T — Brush Table(TSU-6T), Air-Gas Pressure, TSU Module, MP/Loader, Locating Pin with X-axis Sensor, EU/UL Specification Machine
• EM 3612 ZRTe — Brush Table, Pneumatic, TSU Module
• EM-3510ZRB — Pneumatic, TSU Module BF
• EMK-3612 M2 — Stationary Front Table, Stationary Front Table EU, Stationary Front Table EXP, Stationary Front Table CHN, Stationary Front Table 4.5, Stationary Front Table 4.5 EU