PEGA-357
Repositioning
17 part numbers, listed in the PEGA-357 parts book, from serial number P3570357, page 59. Every number below is what Amada printed, with the page it came from, so you can check it against the book itself.
Part numbers, drawing numbers, superseded numbers and names, from the 16 Amada parts books we have read end to end. Free, nothing to sign up for.
| Part number | Name | Formerly | Drawing | Page |
|---|---|---|---|---|
| 74304117 | Repositioning plate(F)(single) | 59 | ||
| 74304119 | Repositioning plate (F)(double) | 59 | ||
| 74302819 | Cap screw | 44028616 | 59 | |
| 74301615 | Spring washer | 44028619 | 59 | |
| 74304118 | Repositioning plate (R) | 59 | ||
| 74305812 | Cylinder base | 59 | ||
| 74305857 | Cap screw | 59 | ||
| 74305801 | Air cylinder (thick) | 59 | ||
| 74305802 | Air cylinder (thin) | 59 | ||
| 74304917 | Cap screw | 59 | ||
| 74305805 | Cylinder head | 59 | ||
| 74305808 | Head cover | 59 | ||
| 74304016 | Repositioning base | 59 | ||
| 74302815 | Cap screw | 59 | ||
| 74305850 | Cone disk spring | 59 | ||
| 74305819 | Guide plate | 59 | ||
| 74305862 | Spring pin | 59 |
The drawing
Amada's own exploded view for this section, with the balloon numbers that match the Index column in the table above. Free for the first few machines you look at.
Where these numbers come from
PEGA-305072(W) Numerical Control Turret Punch Press Parts List (1987-06), Amada, Technical Library TSI-SRC-0139
Part numbers change between revisions of the same machine. Check the number against your serial plate, and confirm with your Amada dealer before ordering.
Need this part?
Send the model, the serial number and the part number. We will tell you what it is, whether it is still available, and what it supersedes.
About the PEGA-357 ↓ Full parts list (PDF) Ask us for a part