P330550066
Amada drawing number

Amada put 2 different part numbers against this one drawing. That is normal in these books — the same component is re-coded between machine generations and between markets, and the drawing number is what stays the same. If you have a print with P330550066 on it, these are the numbers it can be ordered under.

These are separate part numbers carrying the same drawing. They are not interchangeable by assumption — check the number against your serial plate and confirm with your Amada dealer before ordering.

Where these numbers belong

52108718 — SOCKET SET SCREW

• AE-2510NT — Workclamp(2), Loading Workclamp(2)

74353707 — Socket Set Screw

• AC-255NT — Brush Table(1), Brush Table(6), Workclamp(1), Loading Workclamp(1), Free-motion Ball Bearing Table(1), Free-motion Ball Bearing Table(6)
• ACIES 2515T — Die Lifting Station, Y-axis, L Workclamp, Brush Table(TSU-6T), Support Cylinder, Spare Workclamp
• AE-2510NT — Workclamp(1), Movable Front Table(1), Movable Rear Table(1)
• EM 3612 ZRTe — Upper and Lower Die, Y-axis, Loading Workclamp, Brush Table, Repositioning Support Cylinder, Spare Workclamp
• EM-3510ZRB — Upper and Lower Die, Y-axis, Loading Workclamp, Brush Table, Repositioning Support Cylinder, Clamp Positioner
• EMK-3610NT — Y-Axis
• EMK-3612 M2 — Y-axis, Center Table, Center Table ASR-M/RMP, Central Table, CL Table, Center Table 4.5
• EMLK-3610NT — Y-Axis(1), Brush Table(10), Brush Table(15), Upward Moving Brush (Table)(1)
• PEGA-244 — Turret