P330250006
Amada drawing number

Amada put 3 different part numbers against this one drawing. That is normal in these books — the same component is re-coded between machine generations and between markets, and the drawing number is what stays the same. If you have a print with P330250006 on it, these are the numbers it can be ordered under.

These are separate part numbers carrying the same drawing. They are not interchangeable by assumption — check the number against your serial plate and confirm with your Amada dealer before ordering.

Where these numbers belong

36110743 — Hex Soc Cap Screw

• EMK-3610NT — Frame(2), Drive(1), Slide(1), Y-Axis, Brush Table(1), Brush Table(2)

74183657 — Hex Socket Cap Screw

• ACIES 2515T — Drive, Turret AI(36ST-2AI)E, Turret AI(32ST-4AI)D, Turret AI(32ST-4AI)E, Turret AI(32ST-4AI)D-1/2"AI, Turret AI(32ST-4AI)E-1/2"AI
• AE-2510NT — Drive(1), Drive(2), AI Drive(6), Middle Drive(Upper), Middle Drive(Lower), Shipping Bracket
• EM 3612 ZRTe — Drive, Turret AI(36ST-2AI)E, Turret AI(32ST-4AI)D, Turret AI(32ST-4AI)E, Turret AI(32ST-4AI)D-1/2"AI, Turret AI(32ST-4AI)E-1/2"AI(2"X2)
• EM-3510ZRB — Drive, Turret AI(36ST-2AI)E, Turret AI(32ST-4AI)E, Turret AI(32ST-4AI)D-1/2"AI, Turret AI(32ST-4AI)E-1/2"AI(2"X2), Turret AI(32ST-4AI)E-1/2"AI(1-1/4"X2)
• EMK-3612 M2 — Drive, Y-axis, Slide, Stationary Front Table, Stationary Front Table EU, Stationary Front Table EXP

79564307 — Hex Soc Cap Screw

• AC-255NT — Drive(1), Drive(2), Turret(15), Turret(16), Turret(17), Turret(for Free-motion Ball Bearing Table)(12)
• EMLK-3610NT — Drive(1), Y-Axis(1), Brush Table(1), Brush Table(3), Brush Table(12), Brush Table(14)