2 models in the EM family are documented on this 49-station layout — which means a turret job on one is, mechanically, the same job on the other.
Tool sizes on this turret, with the number of keyed stations in the final column.
| Size | Tool diameter | Stations | Of which keyed |
|---|---|---|---|
| A | 1/2 in | 24 | — |
| B | 1-1/4 in | 16 | — |
| C | 2 in | 3 | — |
| D | 3-1/2 in | 2 | — |
| E | 4-1/2 in | 2 | — |
| B auto-index | 1-1/4 in | 2 | 2 |
| Total | 49 |
Turret type: Same-diameter disks. Fixed stations and auto-index stations are listed separately above; together they make the 49-station total.
Each row is a model documented on this layout, with the factory source and page it was verified from. 2 of 2 have a model page on this site.
| Model | Source | Page |
|---|---|---|
| EM | ||
| EM 2510 MII | TSI-SRC-0121 | p. 13 |
| EM 2612 MII | TSI-SRC-0121 | p. 13 |
Every figure above comes from an Amada document held in TSI's technical library. Nothing here is inferred from a model number.
The same model number was sold with more than one turret, so the station count has to be read off the machine rather than assumed. Send us the serial plate — a photo and where you found it — and we will tell you which layout you have and how many stations that means.
Reviewed by Mike Sprehn — Owner and President, Turret Sleeving International. Mike has been part of turret sleeving from the start and has helped improve both the process and the sleeves themselves. About TSI ›
Last reviewed 3 September 2026