Home › 48 Station / 0 Auto-Index Turret

Amada 48 Station
0 Auto-Index Turret

3 models in the Coma family are documented on this 48-station layout — which means a turret job on one is, mechanically, the same job on the others.

48Stations
0Auto-index
3Models documented

Station mix

Tool sizes on this turret, with the number of keyed stations in the final column.

T102 — size A, 1/2", fixedT203 — size A, 1/2", fixedT135 — size A, 1/2", fixedT236 — size A, 1/2", fixedT337 — size A, 1/2", fixedT146 — size A, 1/2", fixedT247 — size A, 1/2", fixedT348 — size A, 1/2", fixedT304 — size A, 1/2", fixedT328 — size A, 1/2", fixedT122 — size A, 1/2", fixedT324 — size A, 1/2", fixedT126 — size A, 1/2", fixedT313 — size A, 1/2", fixedT223 — size A, 1/2", fixedT227 — size A, 1/2", fixedT111 — size A, 1/2", fixedT212 — size A, 1/2", fixedT318 — size B, 1-1/4", fixedT129 — size B, 1-1/4", fixedT108 — size B, 1-1/4", fixedT309 — size B, 1-1/4", fixedT321 — size B, 1-1/4", fixedT114 — size B, 1-1/4", fixedT117 — size B, 1-1/4", fixedT120 — size B, 1-1/4", fixedT330 — size B, 1-1/4", fixedT333 — size B, 1-1/4", fixedT138 — size B, 1-1/4", fixedT339 — size B, 1-1/4", fixedT105 — size B, 1-1/4", fixedT306 — size B, 1-1/4", fixedT315 — size B, 1-1/4", fixedT342 — size B, 1-1/4", fixedT144 — size B, 1-1/4", fixedT345 — size B, 1-1/4", fixedT132 — size B, 1-1/4", fixedT141 — size B, 1-1/4", fixedT216 — size C, 2", fixedT210 — size C, 2", fixedT234 — size C, 2", fixedT240 — size C, 2", fixedT231 — size D, 3-1/2", fixedT207 — size D, 3-1/2", fixedT219 — size D, 3-1/2", fixedT243 — size D, 3-1/2", fixedT225 — size E, 4-1/2", fixedT201 — size E, 4-1/2", fixed201E102203304105306207D108309210111212313114315216117318219D120321122223324225E126227328129330231D132333234135236337138339240141342243D14434514624734848STATIONSNO AUTO-INDEX
A 1/2 inB 1-1/4 inC 2 inD 3-1/2 inE 4-1/2 in

Every station bore on the turret, at its true position, numbered as Amada numbers it. Bore positions, bore sizes and number placement are read straight from the factory layout sheet (coma 46 48 52 STATION_20260901_0001 p.2); the station numbers and tool sizes are cross-checked against two separate records before this drawing is built. Stations are grouped, not evenly spaced — that grouping is real and it is how you recognise your turret. Hover or tap a bore for its size.

SizeTool diameterStationsOf which keyed
A1/2 in186
B1-1/4 in2010
C2 in44
D3-1/2 in44
E4-1/2 in22
Total48

Turret type: Legacy turret; type not stated. Fixed stations and auto-index stations are listed separately above; together they make the 48-station total.

Station index

Every station on this turret by number and tool size. If you know the station you are tooling, this tells you the size that fits it. Auto-index stations are outlined.

Track 1 · inside track · 16 stations

T102AT105BT108BT111AT114BT117BT120BT122AT126AT129BT132BT135AT138BT141BT144BT146A

Track 2 · middle track · 16 stations

T201ET203AT207DT210CT212AT216CT219DT223AT225ET227AT231DT234CT236AT240CT243DT247A

Track 3 · outside track · 16 stations

T304AT306BT309BT313AT315BT318BT321BT324AT328AT330BT333BT337AT339BT342BT345BT348A

Amada models that use this turret

Each row is a model documented on this layout, with the factory source and page it was verified from. 3 of 3 have a model page on this site.

ModelSourcePage
Coma
COMA 557TSI-SRC-0106; TSI-SRC-0109p. Green Folder p. 3; parts p. 40
COMA 567TSI-SRC-0106; TSI-SRC-0109p. Green Folder p. 3; parts p. 40
COMA 588TSI-SRC-0106; TSI-SRC-0110p. Green Folder p. 3; parts pp. 43, 47

Sources

Every figure above comes from an Amada document held in TSI's technical library. Nothing here is inferred from a model number.

Not sure which turret you have?

The same model number was sold with more than one turret, so the station count has to be read off the machine rather than assumed. Send us the serial plate — a photo and where you found it — and we will tell you which layout you have and how many stations that means.

Send us your serial plate 📞 +1 435-723-5688

Reviewed by Mike Sprehn — Owner, Turret Sleeving International. Mike has been part of turret sleeving from the start and has helped improve both the process and the sleeves themselves. About TSI ›

Last reviewed 3 September 2026