Home › 45 Station / 4 Auto-Index Turret

Amada 45 Station
4 Auto-Index Turret

This is one of the most widely used Amada turrets. 12 models across the AC, AE, Coma, EM and Vipros families are documented on the same 45-station layout — which means a turret job on one is, mechanically, the same job on the others.

45Stations
4Auto-index
1000Disk diameter mm
12Models documented

Station mix

Tool sizes on this turret, with the number of keyed stations in the final column.

T344 — size A, 1/2", fixedT243 — size A, 1/2", fixedT323 — size A, 1/2", fixedT142 — size A, 1/2", fixedT222 — size A, 1/2", fixedT121 — size A, 1/2", fixedT335 — size A, 1/2", fixedT133 — size A, 1/2", fixedT234 — size A, 1/2", fixedT213 — size A, 1/2", fixedT112 — size A, 1/2", fixedT314 — size A, 1/2", fixedT107 — size A, 1/2", fixedT208 — size A, 1/2", fixedT309 — size A, 1/2", fixedT330 — size A, 1/2", fixedT128 — size A, 1/2", fixedT229 — size A, 1/2", fixedT238 — size A, 1/2", fixedT318 — size A, 1/2", fixedT339 — size A, 1/2", fixedT137 — size A, 1/2", fixedT217 — size A, 1/2", fixedT116 — size A, 1/2", fixedT236 — size B, 1-1/4", auto-indexT215 — size B, 1-1/4", auto-indexT102 — size B, 1-1/4", fixedT303 — size B, 1-1/4", fixedT104 — size B, 1-1/4", fixedT305 — size B, 1-1/4", fixedT320 — size B, 1-1/4", fixedT341 — size B, 1-1/4", fixedT119 — size B, 1-1/4", fixedT140 — size B, 1-1/4", fixedT110 — size B, 1-1/4", fixedT311 — size B, 1-1/4", fixedT131 — size B, 1-1/4", fixedT332 — size B, 1-1/4", fixedT225 — size C, 2", auto-indexT201 — size C, 2", auto-indexT206 — size C, 2", fixedT226 — size C, 2", fixedT227 — size D, 3-1/2", fixedT245 — size E, 4-1/2", fixedT224 — size E, 4-1/2", fixed225C332131311110215119320236305102140303104341245E226C227D206C224E201C1281122432171421071162381371332292081212222342133233143183093353393443301000 MM DISC45STATIONS4 AUTO-INDEXB 1-1/4 in215, 236C 2 in201, 225
A 1/2 inB 1-1/4 inC 2 inD 3-1/2 inE 4-1/2 inAuto-index white ring

Every station bore on the turret, at its true position, numbered as Amada numbers it. Bore positions, bore sizes and number placement are read straight from the factory layout sheet (Turret 1000mm Disc Thick 45 Station 4 Auto Index); the station numbers and tool sizes are cross-checked against two separate records before this drawing is built. Stations are grouped, not evenly spaced — that grouping is real and it is how you recognise your turret. Hover or tap a bore for its size.

SizeTool diameterStationsOf which keyed
A1/2 in248
B1-1/4 in1212
C2 in22
D3-1/2 in11
E4-1/2 in22
B auto-index1-1/4 in22
C auto-index2 in22
Total45

Turret type: Thick disk. Fixed stations and auto-index stations are listed separately above; together they make the 45-station total.

Station index

Every station on this turret by number and tool size. If you know the station you are tooling, this tells you the size that fits it. Auto-index stations are outlined.

Track 1 · inside track · 14 stations

T102BT104BT107AT110BT112AT116AT119BT121AT128AT131BT133AT137AT140BT142A

Track 2 · middle track · 17 stations

T201CT206CT208AT213AT215BT217AT222AT224ET225CT226CT227DT229AT234AT236BT238AT243AT245E

Track 3 · outside track · 14 stations

T303BT305BT309AT311BT314AT318AT320BT323AT330AT332BT335AT339AT341BT344A

Amada models that use this turret

Each row is a model documented on this layout, with the factory source and page it was verified from. 11 of 12 have a model page on this site.

ModelSourcePage
AC
AC255NTTSI-SRC-0117p. IX-4
AE
AE2510NTTSI-SRC-0019p. 2
AE255NTTSI-SRC-0019p. 2
Coma
COMA 557TSI-SRC-0003; TSI-SRC-0111p. layout p. 1; parts pp. 1, 114-115
COMA 567TSI-SRC-0003; TSI-SRC-0111p. layout p. 1; parts pp. 1, 114-115
COMA 588TSI-SRC-0003; TSI-SRC-0111p. layout p. 1; parts pp. 1, 114-115
EM
EM 2510NTTSI-SRC-0118; TSI-SRC-0119p. 2; 508, 512
Vipros
VIPROS 345TSI-SRC-0003p. 1
VIPROS 357TSI-SRC-0003p. 1
VIPROS 357 QueenTSI-SRC-0003p. 1
VIPROS 367 documented, no page yetTSI-SRC-0003p. 1
VIPROS 367 QueenTSI-SRC-0003p. 1

Sources

Every figure above comes from an Amada document held in TSI's technical library. Nothing here is inferred from a model number.

Not sure which turret you have?

The same model number was sold with more than one turret, so the station count has to be read off the machine rather than assumed. Send us the serial plate — a photo and where you found it — and we will tell you which layout you have and how many stations that means.

Send us your serial plate 📞 +1 435-723-5688

Reviewed by Mike Sprehn — Owner, Turret Sleeving International. Mike has been part of turret sleeving from the start and has helped improve both the process and the sleeves themselves. About TSI ›

Last reviewed 3 September 2026