Home › 44 Station / 2 Auto-Index Turret

Amada 44 Station
2 Auto-Index Turret

This is one of the most widely used Amada turrets. 13 models across the Coma, Pega, Vela, Vipros families are documented on the same 44-station layout — which means a turret job on one is, mechanically, the same job on the others.

44Stations
2Auto-index
1000Disk diameter mm
13Models documented

Station mix

Tool sizes on this turret, with the number of keyed stations in the final column.

T310 — size A, 1/2", fixedT108 — size A, 1/2", fixedT209 — size A, 1/2", fixedT237 — size A, 1/2", fixedT132 — size A, 1/2", fixedT136 — size A, 1/2", fixedT124 — size A, 1/2", fixedT233 — size A, 1/2", fixedT354 — size A, 1/2", fixedT338 — size A, 1/2", fixedT225 — size A, 1/2", fixedT326 — size A, 1/2", fixedT104 — size A, 1/2", fixedT253 — size A, 1/2", fixedT205 — size A, 1/2", fixedT152 — size A, 1/2", fixedT306 — size A, 1/2", fixedT334 — size A, 1/2", fixedT130 — size B, 1-1/4", fixedT155 — size B, 1-1/4", fixedT314 — size B, 1-1/4", fixedT102 — size B, 1-1/4", fixedT303 — size B, 1-1/4", fixedT331 — size B, 1-1/4", fixedT141 — size B, 1-1/4", fixedT113 — size B, 1-1/4", fixedT342 — size B, 1-1/4", fixedT356 — size B, 1-1/4", fixedT127 — size B, 1-1/4", fixedT328 — size B, 1-1/4", fixedT139 — size B, 1-1/4", fixedT111 — size B, 1-1/4", fixedT216 — size B, 1-1/4", auto-indexT340 — size B, 1-1/4", fixedT244 — size B, 1-1/4", auto-indexT312 — size B, 1-1/4", fixedT207 — size C, 2", fixedT223 — size C, 2", fixedT251 — size C, 2", fixedT235 — size C, 2", fixedT243 — size D, 3-1/2", fixedT215 — size D, 3-1/2", fixedT201 — size E, 4-1/2", fixedT229 — size E, 4-1/2", fixed141127216314340328139113111201E251C223C207C155102342312303356215D244243D229E331130235C2091082333341361241042372252052531523263063541323383101000 MM DISC44STATIONS2 AUTO-INDEXB 1-1/4 in216, 244
A 1/2 inB 1-1/4 inC 2 inD 3-1/2 inE 4-1/2 inAuto-index white ring

Every station bore on the turret, at its true position, numbered as Amada numbers it. Bore positions, bore sizes and number placement are read straight from the factory layout sheet (Turret 1000mm Disc Thick 44 Station 2 Auto Index); the station numbers and tool sizes are cross-checked against two separate records before this drawing is built. Stations are grouped, not evenly spaced — that grouping is real and it is how you recognise your turret. Hover or tap a bore for its size.

SizeTool diameterStationsOf which keyed
A1/2 in186
B1-1/4 in1616
C2 in44
D3-1/2 in22
E4-1/2 in22
B auto-index1-1/4 in22
Total44

Turret type: Thick disk. Fixed stations and auto-index stations are listed separately above; together they make the 44-station total.

Station index

Every station on this turret by number and tool size. If you know the station you are tooling, this tells you the size that fits it. Auto-index stations are outlined.

Track 1 · 14 stations

T102BT104AT108AT111BT113BT124AT127BT130BT132AT136AT139BT141BT152AT155B

Track 2 · 16 stations

T201ET205AT207CT209AT215DT216BT223CT225AT229ET233AT235CT237AT243DT244BT251CT253A

Track 3 · 14 stations

T303BT306AT310AT312BT314BT326AT328BT331BT334AT338AT340BT342BT354AT356B

Amada models that use this turret

Each row is a model documented on this layout, with the factory source and page it was verified from. 12 of 13 have a model page on this site.

ModelSourcePage
Coma
COMA 555TSI-SRC-0001p. 1
COMA 557TSI-SRC-0001p. 1
COMA 567TSI-SRC-0001p. 1
COMA 588TSI-SRC-0001p. 1
Pega
PEGA 344TSI-SRC-0001p. 1
PEGA 345KTSI-SRC-0001p. 1
PEGA 345QTSI-SRC-0001p. 1
PEGA 357TSI-SRC-0001p. 1
PEGA 367TSI-SRC-0001p. 1
Vela
VELA II 355TSI-SRC-0001p. 1
Vipros
VIPROS 345TSI-SRC-0001p. 1
VIPROS 357TSI-SRC-0001p. 1
VIPROS 367 documented, no page yetTSI-SRC-0001p. 1

Sources

Every figure above comes from an Amada document held in TSI's technical library. Nothing here is inferred from a model number.

Not sure which turret you have?

The same model number was sold with more than one turret, so the station count has to be read off the machine rather than assumed. Send us the serial plate — a photo and where you found it — and we will tell you which layout you have and how many stations that means.

Send us your serial plate 📞 1-888-686-5900

Reviewed by Mike Sprehn — Owner and President, Turret Sleeving International. Mike has been part of turret sleeving from the start and has helped improve both the process and the sleeves themselves. About TSI ›

Last reviewed 3 September 2026