74314615
Locating Snap Ring

Also printed as Snap ring.

Drawing number

• Drawing P406108031 — Amada also puts 79340271 against it.

Where Amada lists this part

Listed in ACIES 2515T

• Unit 8, YL-axis.
• Unit 62, C/P Workclamp.
• Unit 70, Spare Workclamp.
• Unit 71, Spare Workclamp.

ACIES2515T(EU_EXP_DOM) Parts List Vol.1 (2013-11), Amada, Technical Library TSI-SRC-0125. Numbers apply from serial 53610008.

Listed in COMA-557

• Unit 37, Auto-index (2").
• Unit 38, Clamp positioner.

CNC Turret Punch Press COMA Series (AMADAN-04P-C) Parts List - COMA-506072 / 505072, Amada, Technical Library TSI-SRC-0109. Numbers apply from serial C67679 (506072), C57982 (505072).

Listed in COMA-567

• Unit 37, Auto-index (2").
• Unit 38, Clamp positioner.

CNC Turret Punch Press COMA Series (AMADAN-04P-C) Parts List - COMA-506072 / 505072, Amada, Technical Library TSI-SRC-0109. Numbers apply from serial C67679 (506072), C57982 (505072).

Listed in COMA-588

• Unit 66, 1-1/4,2" AI (1).
• Unit 67, 1-1/4,2" AI (2).
• Unit 70, C. positioner (2).
• Unit 71, C. positioner (3).

Parts List - CNC Turret Punch Press COMA-508080 (AMADAN-04P-C), Amada, Technical Library TSI-SRC-0110. Numbers apply from serial 00088018.

Listed in EM 3612 ZRTe

• Unit 643, Spare Workclamp.
• Unit 644, Spare Workclamp.

EM3612ZRT(EU_EXP_DOM) Parts List Vol.1 (2013-09), Amada, Technical Library TSI-SRC-0129. Numbers apply from serial 36125002.

Listed in EM-3510ZRB

• Unit 423, C/P Workclamp.
• Unit 448, Spare Workclamp.
• Unit 449, Spare Workclamp.

EM3510ZRB(EU_EXP_DOM) Parts List Vol.1 (2013-12), Amada, Technical Library TSI-SRC-0128. Numbers apply from serial 35105002.

Listed in PEGA-345 King

• Unit 15, Auto-index.

PEGA-304050 KING Numerical Control Turret Punch Press Parts List (1986-10), Amada, Technical Library TSI-SRC-0134. Numbers apply from serial P3450057.

Listed in PEGA-357

• Unit 18, Auto-index (option).

PEGA-305072(W) Numerical Control Turret Punch Press Parts List (1987-06), Amada, Technical Library TSI-SRC-0139. Numbers apply from serial P3570357.

Listed in VIPROS-358 King

• Unit 93, Clamp Positioner(2).
• Unit 94, Clamp Positioner(3).

VIPROS-358KING (AMADAN-04P-C+PHNC) CNC Turret Punch Press Parts List (1995-07), Amada, Technical Library TSI-SRC-0137. Numbers apply from serial 35820055.

Formerly

Amada previously listed this part as 10314125, 36181516. The older number appears in the earlier books; the newer one supersedes it. Confirm with your Amada dealer before ordering.

The same drawing under another number

Amada re-coded standard hardware between eras. These are separate part numbers carrying the same drawing — not interchangeable by assumption, so confirm with your Amada dealer before ordering.

• Amada lists the same drawing under part number 79340271 on EMLK-3610NT.