74304614
Release spring

Also printed as Release Spring.

Drawing number

• Drawing 0816006 — Amada also puts 74335617, 74516923 against it.

Where Amada lists this part

Listed in AE-2510NT

• Unit 31, Short Workclamp.

AE2510NT(EXP) Parts List (2010-07), Amada, Technical Library TSI-SRC-0126. Numbers apply from serial 22510001.

Listed in COMA-557

• Unit 41, Pneumatic clamp (loading).
• Unit 42, Hydraulic thin clamp (loading).

CNC Turret Punch Press COMA Series (AMADAN-04P-C) Parts List - COMA-506072 / 505072, Amada, Technical Library TSI-SRC-0109. Numbers apply from serial C67679 (506072), C57982 (505072).

Listed in COMA-567

• Unit 41, Pneumatic clamp (loading).
• Unit 42, Hydraulic thin clamp (loading).

CNC Turret Punch Press COMA Series (AMADAN-04P-C) Parts List - COMA-506072 / 505072, Amada, Technical Library TSI-SRC-0109. Numbers apply from serial C67679 (506072), C57982 (505072).

Listed in COMA-588

• Unit 22, Clamp (3).
• Unit 23, Clamp (4).

Parts List - CNC Turret Punch Press COMA-508080 (AMADAN-04P-C), Amada, Technical Library TSI-SRC-0110. Numbers apply from serial 00088018.

Listed in PEGA-345 King

• Unit 7, Clamp.

PEGA-304050 KING Numerical Control Turret Punch Press Parts List (1986-10), Amada, Technical Library TSI-SRC-0134. Numbers apply from serial P3450057.

Listed in PEGA-357

• Unit 7, Clamp.
• Unit 19, Hydraulic thin clamp (option).

PEGA-305072(W) Numerical Control Turret Punch Press Parts List (1987-06), Amada, Technical Library TSI-SRC-0139. Numbers apply from serial P3570357.

The same drawing under another number

Amada re-coded standard hardware between eras. These are separate part numbers carrying the same drawing — not interchangeable by assumption, so confirm with your Amada dealer before ordering.

• Amada lists the same drawing under part number 74335617 on COMA-588, EMK-3610NT, PEGA-244, VIPROS-358 King.
• Amada lists the same drawing under part number 74516923 on COMA-557, COMA-567, EMLK-3610NT.